Skip to main content

C&I Grade · Outdoor · Liquid Cooled

125 kW
261 kWh
All-in-One.
Liquid-Cooled.

Pack-level active liquid cooling maintaining cell temperature differentials within 3℃. Engineered for continuous high-availability commercial & industrial operations.

261kWh
System Energy Capacity
125kW
Rated AC Output Power
8000+
LFP Cycle Life
≥89%
Round-Trip Efficiency
≤3
Max. Cell Temperature Differential
01 / Thermal Management

Pack-Level
Liquid Cooling

Unlike rack-level air cooling, our system channels coolant directly adjacent to each cell module — maintaining temperature differentials under 3℃ even at full C-rate discharge in 45℃ ambient conditions. This directly translates to longer calendar life and more predictable capacity fade.

Active coolant loop ≤3℃ cell ΔT 45℃ ambient rated
IP54
All-Weather Ingress Protection
02 / Safety Architecture

Five-Layer
Safety System

Cell-level BMS monitoring with millisecond fault isolation prevents cascade failure. Fully automatic aerosol-based fire suppression requires zero human intervention. IP54-rated enclosure ensures reliable operation outdoors including rain, coastal humidity, and heavy dust conditions.

Cell-level BMS Aerosol suppression IP54 outdoor
1.4
Total System Footprint
03 / System Integration

Fully Integrated
All-in-One

PCS, BMS, thermal management, and battery modules pre-integrated in a single outdoor cabinet. No separate inverter room, no complex wiring — connect to grid and commission within hours. Compact 1.4m² footprint minimises civil works costs even on constrained sites.

1.4m² footprint Integrated PCS + BMS Fast commissioning
Configuration
Technical Specifications

Every Parameter
That Matters

Loading…

Deployment Scenarios

Where It
Performs Best

Industrial Parks
Peak shaving and demand charge reduction for factories and logistics hubs. Rapid ROI through electricity cost arbitrage.
EV Charging Hubs
Deliver instantaneous peak power for DC fast-chargers without upgrading grid connection capacity.
Telecom Stations
Mission-critical backup power with automatic millisecond-switchover for uninterrupted service.
Solar & Wind Farms
Time-shift renewable generation to peak demand hours and enable ancillary services revenue.

Ready to Deploy?

Our engineering team will tailor a solution for your specific load profile and site conditions.

🤔 Not sure this is the right ESS for your project?

Take the ESS Selection Guide →