5.12 kWh
5500 W
Plug & Play.
Stackable.
All-in-one home battery with built-in pure sine wave inverter and 6000W MPPT solar charger. Stack up to 16 units for 80kWh+ capacity. One technician, under 2 hours, no special tools.
Built-In 5500W
Inverter + 6000W MPPT
Unlike external-inverter systems that require a separate unit, this all-in-one module integrates a 5500W pure sine wave inverter and 6000W MPPT solar charger into every module. Cleanly powers air conditioners, refrigerators, and sensitive electronics — 11,000VA peak handles heavy motor-start loads without voltage sag or interruption.
Stack Up to 16 Units
— 80kWh+
Scale system capacity from 5.12kWh to 81.92kWh by stacking up to 16 units in parallel without replacing the original system. Plug-and-play inter-unit cables and the integrated BMS handle all cell balancing automatically — expansion takes hours, not days, and requires no new inverter or wiring design.
18kg Slim Profile
— Solo Install
At just 150mm deep and 18kg, one technician can mount and fully connect each module in under 2 hours without lifting equipment or specialist tools. Fits flush against any wall in garages, utility rooms, and sheltered outdoor locations where larger battery systems simply cannot fit.
Every Parameter
That Matters
Loading...
Where It
Performs Best
Ready to Go Solar?
Our team will help you design the right stack size for your home energy profile and solar system.